 |
|
Phoenix Black Box
| 
|
Features
It contains FLS4S + PKD1 + PKD1 RD so you can
use Original Nokia Phoenix (DCT4 and WD2) +
Original Wintesla (DCT3) and also flashing 6630
and 9500. Extra added unlocking for DCT3 and
DCT4 and now also does unlocking for NEC 3G
phones.
Note: 6630 unlock is not supported
Flashing 6630 by DKU2
|
|
|
NEC
3G One Button Unlocker for PBB
Supported models:
e228, e313, e313V, e313B, e313E,
c313, c313V, c313B, c313E,
e616, e616V, e616B, e616E,
n313, n616, n616V
- Reset codes counter
- Unlock all blocked phones
- Fast unlocking for all versions up to v22
- Unlock versions v22 and above after flash downgrade
Note:To run this software online update to PBB
firmware version 05 or higher is required.
More about PBB
3 devices in one: FLS-4, PKD-1 (normal) or PKD-1RD
(Research and Development dongle) In FLS-4 mode the
license counter is set to 1000 units and STOPPED! Also
some limited FPS-8 functions enabled (flashing too).
It can use FPS-8 menu for flashing when in PKD-1 mode.
More detailed information than in FLS-4 mode when
flashing in FPS-8 mode. Work as PKD-1RD (more menus
enabled in Wintesla/Phoenix) R&D option in Flash
menu for ADSP erase and blank check. TDMA, CDMA, WCDMA
flash, repair, tuning, calibrate and Bluetooth and
ADSP repair and flash.
It comes with small maintenance software who can do
the following: Set FLS / PKD dongle serial number to
ANY value, 5 digits and / or 6 digits!!! This is for
prevent locking specific serial number(s) in future
Phoenix updates who will be released by Nok. Enables /
disables FLS-4 down counter stop function. (Maybe
future updates of Phoenix software will no more allow
stopped counter). Set FLS-4 counter to any value
between 1 and 16777215.
Usually Phoenix software is updated by Nokia to
support new phone types / models BEFORE these phones
reach the market. So, no more waiting on 3rd party
softwares to receive updated software for new models.
Usually this takes long time, because the programmer(s)
of 3rd party software need to receive the new phone
model and do some research to update the software.
Can be used for many things than any other 3rd party
software, like calibrate, tuning, testing, increase
emission power...
For some operations additional equipment is needed: RF
generator, jig test, frequency counter.
Also, any 3rd party software just INCREASES the
programming bugs, because all of these softwares are
based on research made on original Nokia Phoenix
tools.
Enable user to work with different Nokia phone
platforms: GSM, EGSM, TDMA, CDMA, WCDMA.
All third party flashers cannot do many service
adjustments nor diagnostics, not to mention that they
cannot be compatible with new upcoming models of NOKIA
phones. Implement virtual COM port with full MBUS /
FBUS specifications, allowing it to be used with much
free software already available for DCT3 / DCT4
phones...
Strong protection against cloning by using IBM BlueZ
smartcard platform.
All boxes are fully tested and quality controlled
using JTAG technology.
Cable Included in Package (41 Cables):
1100, 2280, 2650, 3200, 3210, 3220, 3300, 3310, 3320,
3360, 3510, 3650, 5100, 5140, 6100, 6170, 6230, 6260,
6310, 6340, 6600, 6630, 6650, 6800, 6820, 7200, 7210,
7280, 7600, 7610, 7650, 7710, 8310, 8850, 8910, 9210,
9500, N-Gage, N-Gage QD, E616, USB Cable
Package Contains
Price
USD
44
|
|
|
|
